?unique=01c22ee)
Crown Polymer 8340 CrownPro True Summer Polyaspartic Topcoat Coating Kit, Clear, 2-Part (3 Gallon)
Crown Polymers #8340 CrownPro 40 Polyaspartic Topcoat Coating Kit is a clear, 2-component, high solids, solvent-based polyaspartic costing system. Tough, durable and UV-stable coating. It has been specifically engineered to be used as a topcoat sealant for all Crown Polymers floor coating systems. This product delivers excellent chemical and abrasion resistance while offering an added protective layer to prolong the longevity of epoxy-based coatings.
Benefits:
- High solids
- UV stable
- Proven stain resistance
- Excellent chemical resistance
- Strong abrasion resistance
- Vertical applications
- Low VOCs
- Strong mechanical properties
- Improves slip-resistance
- Choice of pigments
TYPICAL USES:
- Pharmaceuticals, Hospitals, Retail Stores, Mechanical Rooms, Warehouses, Shop Floors, Laboratories.
Specifications:
- Color: Clear
- Components: 2 Sides
- Visual Appearance: Glossy
- Density: 9.5 lb/gal
- Solids Content: 80%
- VOC content: <50g/l
- Pot Life: 40 minutes
- Equipment: Brush, Roller and Flat Rubber Squeegee
- Number of Coats; 1 at 6-8 mils
- Theoretical Coverage: 200-267 ft2/gal at 6-8 mils WFT
- Dry to Touch: 6 to 8 hours
- Light Traffic: 24 hours
- Full Cure: 7 days
- Recoat Time: 12 to 72 hours
- Minimum Application Temperature: 50ºF
- Mix ratio by Volume: 2:1 (A/B)
- Packaging: 3 Gallon Kit
- Shelf Life: Maximum shelf life of one year when stored off the ground in a dry area at 50º to 110ºF, in the original sealed container.
This content will be shared across all product pages.
EMAIL: INFO@BEETONSERVICES.COM
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.